

- Glass
- Standard Hardware
- Standard Accessories
- Optional Items
- Performance Chart
- Single Door Sizes
- Pair of Door Sizes
- Transom Options
- Sidelite Options
- Hardware
- Hand Forged Grille
- Medallions
Large and Small Missile
- 7/16" thick Laminated
- 1" thick Insulated Laminated
- Interlayer used: .090" PVB Saflex by SOLUTIA
Clear, tinted and energy efficient LoE glass options are available with this product.
- Pair of CGI egress self closing locks (sill mounted). Note: one lock used on windows 28" wide or less
- Pair of concealed balances
- CGI patented Carrier Slide System
- Pair of concealed balances
- Solid brass or stainless steel hinges
- Baldwin single cylinder dead bolt
- Patented single turn three point lock
- Active and inactive door panels pre-bored for levers
- Flushbolts at inactive panel
- Available hardware finish: Satin Nickel - Polished Brass - Venetian Bronze
- Out-swing configuration
- 2" thick (nominal) door panels
- Complete frame, threshold and weatherstripping
- Extruded snap-on glazing beads
- Extruded astragal adaptor
- Fastener covers
- Inswing configuration
- Hand Forged Aluminum Grills
- Baldwin Hardware Sets
- True horizontal rail (4 5/8" wide)
- ½" thick decorative panels (in lieu of glass)
- Matching sidelites and transoms
- Archtop windows used as transom
- Extruded double applied colonial muntins in standard or custom grids.
- Muntins available in 1 inch and 3 ½" widths
- Contemporary style (square glazing) beads
TEST TYPE |
RESULTS |
|
|---|---|---|
Air Infiltration |
.076 CFM @ 6.24 PSF |
|
Maximum Water Resistance |
without waterbar adaptor |
12 PSF |
with waterbar adaptor |
15 PSF |
|
Uniform Static Load Test |
@ 37x63 window (Ann/Ann Glass) |
+95 PSF/- 95 PSF |
@ 36x60 window (HS/HS Glass) |
+100 PSF/-209.5 PSF |
|
@ 54x96 window (Temp/Temp Glass) |
+100 PSF/-120 PSF |
|
Cyclic Design Load |
@ 37x63 window (Ann/Ann Glass) |
+95 PSF/-95 PSF |
@ 36x60 window (HS/HS Glass) |
+100 PSF/-209.5 PSF |
|
@ 54x96 window (Temp/Temp Glass) |
+100 PSF/-120 PSF |
|
Forced Entry Test (AAMA 1302.5) |
Passed |
|
SINGLE DOOR SIZES
Size shown is overall frame dimension

CUSTOM SIZES ALSO AVAILABLE
Minimum available Single Door Frame width is 22"
Maximum available Single Door Frame width is 44 9/16"
Maximum available Door Frame height is 108 3/4"
Maximum over-all Single Door Frame area is 29.12 Sq Ft
OUT-SWING DOOR HANDING DESIGNATION

IN-SWING DOOR HANDING DESIGNATION

PAIR OF DOORS SIZE
Size shown is overall frame dimension

CUSTOM SIZES ALSO AVAILABLE
Minimum available Pair of Door Frame width is 42"
Maximum available Pair of Door Frame width is 86 1/2"
Maximum available Door Frame height is 108 3/4"
Maximum over-all Pair of Door Frame area is 56.26 Sq Ft
OUT-SWING DOOR HANDING DESIGNATION

IN-SWING DOOR HANDING DESIGNATION

TRANSOM OPTIONS
All doors and sidelites are available with integral transoms.
Transoms cannot be used as Independent stand alone units.
Standard transoms heights are 12 7/8", 24 7/8", and 36 7/8".

SIDELITES
Size shown is overall frame dimension

CUSTOM SIZES ALSO AVAILABLE
Doors and Free Standing Sidelites have Full Jambs on both sides.
Self-mating sidelites have a full jamb on one side and a mating
adaptor on the other side.
A full jamb is required to be attached to a wall or vertical mullion.
Refer to full jamb and mating adaptor illustrations.

EXAMPLES OF SOME COMBINATION OPENINGS
Using Self-Mating Sidelites



















































_sm.jpg)
_sm.jpg)
_sm.jpg)
_sm.jpg)
_sm.jpg)

